• Reinforced concrete structure with unidirectional and lattice slabs, all according to the Technical Building Code (Código Técnico de la Edificación) and monitored by an approved external body.

• Walkable inverted roof with insulation and finish of non-slip porcelain tile flooring.

• Exterior wall formed by half-brick masonry, with insulation, air cavity, and interior lining made of galvanised steel structure, thermal insulation, and plasterboard.
• Exterior finish will be a first-quality cement render with paint or similar.
• Roof terraces with glass railings at mid-height.
• Metal fencing for the parking area of Block 1 and closure fencing for Block 2.

• Lacquered aluminium exterior carpentry with thermal break from Cortizo or similar, with built-in ventilators.
• Climalit-type double glazing (or similar) with air chamber. Sliding and tilt-and-turn closures as per project.
• Armoured entrance door to apartments.
• Exterior sliding doors on balconies made of thermally treated wood or lacquered aluminium with wood-like appearance for sun protection.
• Railings with metal profiles and uprights on balcony doors.

• Interior walls of the apartments and between apartments made with galvanised steel profiles, acoustic insulation, and plasterboard, complying with CTE requirements.
• Service shaft closures made with half-brick masonry.

• Interior doors made of wood, either hinged or sliding depending on location.
• High-quality handle systems, with locks in bathrooms and toilets.
• Main armoured door with 3-point security lock.
• Wardrobe fronts with white lacquered wooden doors; interiors lined with melamine.

• Porcelain tile flooring inside the apartments.
• Non-slip porcelain tile for exterior flooring.
• Screeded concrete in parking areas and common areas.
• Synthetic wood-look flooring in the pool area.

• Smooth plastic paint finish on vertical surfaces in corridors, living rooms, and bedrooms.
• Bathrooms with porcelain tile cladding.
• Wet walls will be fully tiled; other walls left with smooth paint so the owner can wallpaper or paint.

• False ceilings with plasterboard throughout the apartment.
• Matte white plastic paint on all ceilings.

• Vitreous porcelain sanitary fixtures in all bathrooms and toilets.
• Toilet with concealed cistern and dual flush button.
• Washbasin and vanity unit with matte finish. Single-lever faucets from RAMON SOLER in brushed nickel or similar.
• Single-lever shower faucet with overhead shower from RAMON SOLER in brushed nickel or similar. Shower screen with fixed panel and hinged door. Fixed glass over U-shaped stainless steel profile on side. Natural B10 shower tray or similar, white slate finish, including drain and drain grille.

• Individual HVAC system with heat pump and aerothermal technology for heating and cooling.
• External aerothermal units installed on the roof to provide air conditioning, heating, and hot water.
• Integrated ducts and grilles.

• Radio and television reception in all rooms (living room, bedrooms, kitchen, and lounge).
• Electronic video intercom for community access.
• High-level electrical system. Electrical mechanisms by Jung, LS990 model or similar.
• Low-consumption LED lighting.

KITCHEN FURNITURE:
• Upper and lower cabinets with first-quality lacquered panels.
• Quartz composite countertop. Colour selected by the client.
• Kitchen equipped with the following appliances:
– Oven
– Ceramic hob
– Extractor hood
– Refrigerator
– Freezer
– Dishwasher
– Microwave

• Elevator with automatic stainless steel doors in cabin and landing.
• Basement parking and storage rooms with natural and forced ventilation.
• Video intercom at entrance.
• Community pool with small-format tile finish and outdoor shower.